• 130 N. West Street Crown Point, Indiana 46307
  • Toll Free:   866 894-7337
    219-644-3231

Battery Reconditioning Shipping

The Battery Packing Kit comes with:Battery Packing Kit

1              Large United States Postal Service Mail Box
1              12” x 12” x 0.75” foam insert (with holes)
1              12” x 12” x 0.5” foam insert
2              12” x 4” x 0.5” foam insert
2              11” x 4” x 0.5” foam insert

 

 

 

 

 

Step 1 – Begin assembling the USPS box by taping the bottom together using reinforced tape.

 

 

 

 

 

 

Step 2- Place the 12” x 12” x 0.5” foam insert at the bottom of the box.

 

 

 

 

 

 

 

 

 

Step 3 – Place the 12” x 4” x 0.5” foam pieces on each side of the box.

 

 

 

 

 

 

 

 

Step 4 – Start placing batteries along the foam piece, alternating the vent positions. The batteries have notches/bumps that allow for proper alignment.

 

 

 

 

 

 

 

 

Step 5 – Finish placing/positioning the batteries (two or three at a time).

 

 

 

 

 

 

 

Step 6 – Once all the batteries are in place, insert both 11” x 4” x 0.5” foam pieces on the remaining sides.

 

 

 

 

Step 7 – Place the top foam piece (12” x 12” x 0.75”) properly onto the batteries, aligning the holes properly on top of the vents.

 

 

 

 

Step 8 – Fold and tape down the two inside flaps with reinforced tape. Fold down the two outside flaps and tape down the middle.