EVc 30/10 Wooden Cooling Box
Home :: EVc 30/10 Wooden Cooling Box
EVc Battery Pack Cooling Box
The cooling box is compatible with typical floor blowers/dryers (where the air blows across the surface of the ground).
- The cooling box slot width is 15”, so the fan must be at least that wide.
- The air blows into the box and through the spaces between the modules.
We offer two cooling boxes:
- Toyota prismatic module cooling box (up to 40 modules)
- Honda cylindrical module cooling tray (up to 32 modules)
Options for the cooling fan:
Model | Fan opening width | Store | Price |
BlueDri One-29 2900 CFM |
18” | Amazon | $114 |
RIDGID Air Mover 1625 CFM |
17” | Home Depot | $199 |
Global Industrial™ 3/4 HP 3 Speed Floor Dryer, Blower 1500 CFM |
16” | Global Industries | $182 |
Cooling box instructions:
- Align the blower facing the cooling box slot.
- Place the clamped battery pack and the blocking board on top of the box.
- Connect the modules to the EVc unit and turn fan on when reconditioning modules.
Cooling tray instructions:
- Align the blower facing the cooling tray slot.
- Lay the cylindrical modules onto the raised inner supports on the tray.
- Connect the modules to the EVc unit and turn fan on when reconditioning modules.
The cooling box must ALWAYS be used when reconditioning modules!